Phoenix Interface |
Rp. 450.000,00
|
Phoenix Interface
It is an interface used for communication a PC with a smartcard ( original as well as pirate ).
The Phoenix interface can also be used to update the EEPROM 24(L)C16 on the Multimac II cards ( Gold Wafer Cards).
This interface require a separate power supply.
Connection with the PC serial port is made by cable 1-1, 9 pin connectors, male-female.
Phoenix interface is possible by using the built in Phoenix hardware.
Existing 3rd party software compatibility is ensured, as a standard serial / COM port is used.
In Phoenix mode, the USB Phoenix is powered by the USB port, while communicating over the COM port.
In standard USB mode only the USB cable is used for both communication and power supply.
USB Phoenix programs most popular smartcards on the market :
PIC-based :
Wafercard (16C84, 16F84, 16F84A)
Goldcard (16F84/16F84A + 24C16)
Silvercard (16F876/16F877 + 24C64)
Greencard (16F876/16F877 + 24C128)
Greencard2 (16F876/16F877 + 24C256)
Bluecard (16F84A + 24C64)
CanaryCard (16F628 + 24C16)
EmeraldCard (16F628 + 24C64)
Singlepic (16F876, 16F627, 16F628).
AVR-based :
Funcard/Funcard2 (AT90S8515 + 24C64)
PrussianCard/Funcard3 (AT90S8515 + 24C128)
PrussianCard2/Funcard4 (AT90S8515 + 24C256)
PrussianCard3/Funcard5 (AT90S8515 + 24C512)
PrussianCard4/Funcard6 (AT90S8515 + 24C1024)
PrussianCard5/Funcard7 (AT90S8515 + 2*24C1024)
JupiterCard (AT90S2343 + 24C16)
|
Compatible CA - Smart Card Support |
|
|
Conax |
4.0/4.00e |
|
Cryptoworks |
1.0/12011 |
|
Irdeto |
1.06/2.09 |
|
Nagravision |
All |
|
SECA I & II |
1.05 |
|
Viaccess |
1.0 V481/ V483 |
|
Zeta |
N/A |
Phoenix modes are easily changed ( pressing a single button in software ), and both 3.58MHz, 3.68MHz and 6.00MHz can be selected, as well as Phoenix mode.
